Plantronics Bluetooth Headset M165 User Manual

Marque 2  
M165  
User Guide  
What’s in the box  
Headset  
Combo cable charger  
Earloop  
Car charger  
3
Headset overview  
Power button  
Call button  
Charge port  
Headset LED (indicator light)  
Volume/mute button  
/
Be safe! Please read the safety guide for important safety, charging,  
battery and regulatory information before using your new headset.  
4
Pairing  
Pair first time  
The first time you switch on your headset it begins the pairing process.  
Place the headset on your ear and turn it on.  
1
2
While the headset LEDs are flashing red and white, activate Bluetooth® on your phone  
and set it to search for new devices.  
• iPhone: Settings > General > Bluetooth > On  
• AndroidSmartphones: Settings > Wireless & Networks > Bluetooth: On > Scan for devices  
NOTE Menus may vary by device.  
3
Select “PLT_M165.”  
4
If your phone asks, enter four zeros (0000) for the passcode or accept the connection.  
The indicator light  
stops flashing red and white once successfully paired.  
Multipoint technology lets you pair a second phone and answer calls from either phone.  
Power on your headset.  
Pair another phone  
1
2
Press and hold the Call button until the indicator light  
hear “pairing.”  
flashes red and white or you  
3
While the indicator light  
flashes red and white, activate Bluetooth on your phone and set  
it to search for new devices.  
4
5
Select “PLT_M165.”  
If your phone asks, enter four zeros (0000) for the passcode or accept the connection.  
The indicator light stops flashing red and white once successfully paired.  
5
Charge  
Your new headset has enough power to pair and make a few calls. It takes two hours to fully  
charge the headset; the indicator light turns off once charging is complete.  
6
Fit  
Adjust the fit  
The universal-fit eartip has a thin loop that bends to gently tuck into the contours of either  
ear. Rotate the eartip on the headset or add the optional clip-on earloop to adjust the fit.  
7
The Basics  
Make/take/end calls  
Answer a call  
Choose:  
• Say “Answer” after call is announced, or  
• Tap the Call button  
Answer a second call  
First, tap the Call button to end current call, then tap the Call button again to answer  
new call.  
End a call  
Tap the Call button to end current call.  
Reject a call  
Choose:  
• Say “Ignore” after call is announced, or  
• Press Call button for 2 seconds  
Call back last call  
To dial your last number you dialed, double-tap the Call button  
.
Voice dial (phone feature)  
Press the Call button for 2 seconds, wait for phone prompt and then tell the phone  
to dial the name of a stored contact.  
You can mute the microphone during a conversation.  
Mute  
During a call, tap the Volume / Mute / until you hear “mute on” or “mute off.”  
While the microphone is muted, an alert repeats every 15 minutes.  
Tap the Volume / Mute / button to cycle through preset levels.  
Adjust the volume  
Streaming audio is controlled using your phone, but when a call rings, the audio  
automatically pauses to allow you to answer or ignore the call. Once the call is ignored  
or ends, the streaming audio is resumed.  
Stream audio  
8
More features  
Save power  
If you leave your headset powered on but out of range of your paired phone for more than 90  
minutes, your headset will conserve its battery power by entering into a DeepSleepmode.  
Once back in range with your phone, tap the Call button to exit DeepSleep mode. If your  
phone is also ringing, tap the Call button again to answer your call.  
Decipher the lights  
Your headset has an indicator light  
a button press.  
that flashes in response to a change in status or after  
Some examples of what you will see are:  
• Solid red until charging complete and then off  
• Flashing red and white during pairing  
• Triple red flash when less than 10 minutes of talk time  
• Triple white flash at incoming call  
Hear it whisper  
Your headset tells you about status changes in English. For example:  
• “Power on”  
• “Pairing successful”  
• “Talk time (x) hours”  
• “Mute on”  
• “Lost connection”  
• “Recharge headset”  
Disable voice commands  
Checking battery level  
This headset only speaks and understands English. If you prefer to use the Call button  
to answer or reject calls, you can disable the voice commands “Answer” or “Ignore.”  
With the headset powered on, simultaneously press the Call and Volume buttons until  
you see the indicator light flash white two times. Repeat these steps to reactivate  
the commands.  
Simply check the Headset battery meter on your iPhone (automatically displayed) or  
Android smartphone (enabled by the MyHeadsetor Find Myheadsetapps)  
9
Specifications  
Talk time  
Up to 7 hours  
Up to 11 days  
7 grams  
Standby time  
Headset weight  
DeepSleep technology  
• Activates when paired headset is out of range for  
over 90 minutes  
• Provides up to 180 days* of battery readiness  
Multipoint technology  
Use one headset to answer calls from either of two  
paired Bluetooth phones  
Charge connector  
Battery type  
Micro USB charging  
Rechargeable non-replaceable lithium ion polymer  
90 minutes for full charge  
Charge time (maximum)  
Headset battery meter  
On-screen for iPhone. Enabled by MyHeadsetor  
Find MyHeadsetapps for Android smartphones  
Bluetooth version  
Bluetooth profiles  
Bluetooth v3.0  
Advanced Audio Distribution Profile (A2DP), Wideband  
Hands Free (HFP) Profile 1.6 and Headset (HSP)  
Profile 1.2  
Operating temperature  
0 – 40°C (32°F – 104°F)  
NOTE Performance is dependent upon battery and may vary by device.  
10  
Support  
plantronics.com/support  
EN  
FI  
NO  
Tel: 0800 410014  
Tel: 0800 117095  
Tel: 80011336  
AR  
FR  
PL  
Tel: +44 (0)1793 842443*  
Tel: 0800 945770  
Tel: +44 (0)1793 842443*  
CS  
GA  
PT  
Tel: +44 (0)1793 842443*  
Tel: 1800 551 896  
Tel: 0800 84 45 17  
DA  
HE  
RO  
Tel: 80 88 46 10  
Tel: +44 (0)1793 842443*  
Tel: +44 (0)1793 842443*  
DE  
Deutschland 0800 9323 400  
Österreich 0800 242 500  
HU  
RU  
Tel: +44 (0)1793 842443*  
Tel: 8-800-200-79-92  
Tel: +44 (0)1793 842443*  
Schweiz  
0800 932 340  
IT  
EL  
Tel: 800 950934  
SV  
Tel: +44 (0)1793 842443*  
Tel: 0200 21 46 81  
NL  
ES  
NL 0800 7526876  
BE 0800 39202  
LUX 800 24870  
TR  
Tel: 900 803 666  
Tel: +44 (0)1793 842443*  
*Support in English  
Safety information: see the separate “For Your Safety” booklet  
2-year limited warranty details: plantronics.com/warranty  
Plantronics B.V.  
Scorpius 140  
2132 LR Hoofddorp  
Netherlands  
plantronics.com  
© 2012 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other  
trademarks are the property of their respective owners.  
Patents US 5,712,453; Patents Pending  
89142-07 (10.12)  

RCA AVC8HP User Manual
Pioneer DEH 6150BT User Manual
Philips P2HD AG HPX170P User Manual
Panasonic NV GS25GN User Manual
Panasonic Car Stereo System RM 1100 User Manual
Metra Electronics Car Stereo System User Manual
Marshall electronic V R70DP User Manual
Konica Minolta 115 User Manual
Kenwood KAC PS501F User Manual
KATA KT A34U User Manual